Custom Men's Plaster Slate Gradient Split Shorts with Mesh Panels and Pockets
| Share | |
|---|---|
| Categories | New Arrivals Autumn/Winter 2026 |
| Brand | Hucai Custom Activewear Manufacturer |
| Model | hc2026093029 |
| Product Type | Men's split running shorts, mid-thigh |
| Main Fabric | Open mesh grid shell with an anti-chafe inner brief |
| Fabric Composition | 85% polyester, 15% spandex |
| Fit | Slim athletic fit, mid rise at the natural waist |
| Waistband | Wide two-tone mesh waistband with an internal drawcord |
| Pocket Layout | Seven pockets: 4 gel, 2 phone and 1 key pocket, plus a rear zip pocket |
| Liner | Built-in anti-chafe inner brief, not a full liner short |
| Key Structure | Deep split vent on each outer leg, open mesh grid face, flat leg hem |
| Branding | Back waistband tab label, vertical hem logo at the side seam |
| Colourway | Plaster to slate: light greige at the waist fading to darker slate at the hem |
| Fabric / Development Options | Alternative mesh gauges, gradient depth and direction, contrast waistband colours |
| Customization | Colourway, gradient direction, waistband colour, pocket layout, branding placement |
| Service | OEM / ODM / Private Label |
Custom Men's Plaster Slate Gradient Split Shorts with Mesh Panels and Pockets
These custom men's gradient split shorts are a mid-thigh style in an open mesh grid fabric that fades from light plaster greige to a darker slate at the hem. A two-tone mesh waistband with an internal drawcord holds a slim athletic fit, and a deep split vent opens each outer leg. Inside sits a built-in anti-chafe inner brief rather than a full liner short. Seven pockets handle race-day storage: four gel, two phone and one key, plus a rear zip pocket. The reference specification states 85% polyester, 15% spandex.
- Plaster-to-slate uneven gradient across an open mesh grid face.
- Deep split vent on each outer leg with a flat hem finish.
- Two-tone mesh waistband with an internal drawcord.
- Seven pockets: four gel, two phone, one key and a rear zip pocket.
- Built-in anti-chafe inner brief instead of a full liner short.
- Back waistband tab label and a vertical hem logo.
- Neutral greige and slate palette for autumn and winter ranges.
Product Specification
| Product Type | Men's split running shorts, mid-thigh |
|---|---|
| Main Fabric | Open mesh grid shell with an anti-chafe inner brief |
| Fabric Composition | 85% polyester, 15% spandex (reference specification) |
| Fit | Slim athletic fit, mid rise at the natural waist |
| Key Structure | Deep split vent on each outer leg, open mesh grid face, flat hem; seven-pocket layout |
| Feature | Plaster-to-slate gradient with deep outer-leg split vents |
| Use Scenario | Endurance running, road training and race day |
| Development Options | Alternative mesh gauges, gradient depth and direction and contrast waistband colours |
| Customization | Colourway, gradient direction, waistband colour, pocket layout and branding placement |
| Logo & Label | Back waistband tab label; heat-transfer or reflective hem logo |
| Development Route | OEM, ODM and private label |
| MOQ | 100 pcs |
| Sample Development | Depends on fabric availability, pattern work, branding method, fit adjustment and revision rounds. |
| Bulk Production | Planned after sample approval and confirmation of fabric, trims, measurements, packaging and QC requirements. |
Development & Customization Notes
Product Development
Development starts from the confirmed mesh split block and the neutral gradient direction, which is what positions this colourway for autumn and winter ranges rather than summer. Buyers can reset the fade depth, invert the gradient, recolour both waistband bands and adjust vent height without changing the pattern. Because the shell is a single open mesh layer over an inner brief, the block stays light and grades cleanly.
Sample Development Notes
Sample rounds should verify gradient read-out across the panel after washing, vent height against stride, hem logo placement and pocket depth for phone and gel sizes. The reference specification states 85% polyester, 15% spandex, so a shell substitution changes how the fade holds and must be re-tested in the same round. Waistband band contrast is part of the colour sign-off. Two to three rounds are typical.
OEM / ODM / Private Label
OEM: build to your tech pack on the confirmed mesh split-short block. ODM: take this neutral gradient direction and deep split vent into your own winter running range. Private label: apply your logo, waistband tab, hem logo, woven labels and packaging. MOQ is 100 pcs per style, with gradient direction, waistband colour, vent height and branding method fixed before sampling.
Best for
Best for endurance and road-training ranges that need a split short in a quieter palette than a bright summer print, and for brands building a neutral autumn/winter story. Also suited to gym and hybrid labels that want a lighter alternative to a lined short. The greige and slate fade photographs well for lookbooks and range sheets.
Private Label Development Notes
Private label runs keep the confirmed mesh shell and split vent and change brand-facing parts: gradient direction, waistband band colours, hem logo, woven labels, packaging and colourway. The neutral palette means colour tolerances should be agreed on a physical standard, because greige and slate read differently under studio and daylight. Vent height and pocket count stay as agreed at sampling.
- 加载中···
- Name
- Phone
- *Title
- *Content