Custom Men's Split Running Shorts with Bonded Hem Vents and Seven Pockets
| Share | |
|---|---|
| Categories | New Arrivals Autumn/Winter 2026 |
| Brand | Hucai Custom Activewear Manufacturer |
| Model | hc2026093027 |
| Product Type | Men's split running shorts, mid-thigh |
| Main Fabric | Woven shell with an anti-chafe inner brief |
| Fabric Composition | 85% polyester, 15% spandex |
| Fit | Relaxed fit, mid rise at the natural waist |
| Waistband | Black two-tone mesh waistband with an internal drawcord |
| Pocket Layout | Seven pockets: 4 gel, 2 phone and 1 key pocket, plus a rear zip pocket |
| Liner | Built-in anti-chafe inner brief, not a full liner short |
| Key Structure | Bonded hem edge, vertical split vents on each outer leg, flatlock seams |
| Branding | Woven label tab at the back centre waistband |
| Colourway | Poppy multi: block-stripe print in poppy red, white and grey-mauve |
| Fabric / Development Options | Alternative print directions, colour-block panels, contrast waistband mesh |
| Customization | Colourway, print artwork, waistband colour, pocket layout, branding placement |
| Service | OEM / ODM / Private Label |
Custom Men's Split Running Shorts with Bonded Hem Vents and Seven-Pocket Storage
These custom men's split running shorts are a mid-thigh style cut from a woven shell and finished with bonded edges at the hem. A black two-tone mesh waistband with an internal drawcord holds the fit, and a vertical split vent opens each outer leg for movement. Inside sits an anti-chafe inner brief instead of a full liner short. Storage runs to seven pockets: four gel, two phone and one key, plus a rear zip pocket. The reference specification states 85% polyester, 15% spandex.
- Bonded hem edges with vertical split vents on each outer leg.
- Seven pockets: four gel, two phone, one key and a rear zip pocket.
- Black two-tone mesh waistband with an internal drawcord.
- Anti-chafe inner brief instead of a full liner short.
- Block-stripe print in poppy red, white and grey-mauve.
- Woven label tab at the back centre waistband.
- Mid-thigh split-short length for race-day movement.
Product Specification
| Product Type | Men's split running shorts, mid-thigh |
|---|---|
| Main Fabric | Woven shell with an anti-chafe inner brief |
| Fabric Composition | 85% polyester, 15% spandex (reference specification) |
| Fit | Relaxed fit, mid rise at the natural waist |
| Key Structure | Bonded hem edge, vertical split vents, flatlock seams; seven-pocket layout; anti-chafe inner brief |
| Feature | Bonded hem split vents with a seven-pocket layout and inner brief |
| Use Scenario | Race day, road running and short-distance training |
| Development Options | Alternative print directions, colour-block panels and contrast waistband mesh |
| Customization | Colourway, print artwork, waistband colour, pocket layout and branding placement |
| Logo & Label | Woven or printed waistband tab; printed or heat-transfer logo options |
| Development Route | OEM, ODM and private label |
| MOQ | 100 pcs |
| Sample Development | Depends on fabric availability, pattern work, branding method, fit adjustment and revision rounds. |
| Bulk Production | Planned after sample approval and confirmation of fabric, trims, measurements, packaging and QC requirements. |
Development & Customization Notes
Product Development
Development starts from the confirmed bonded hem and split-vent construction, which is what separates this style from a standard running short. Buyers can change the print scale and direction, recolour the mesh waistband, open the vent higher or lower, and reset the pocket count without changing the bonded edge process. The inner brief is a single layer, so the block stays light and quick to grade.
Sample Development Notes
Sample rounds should confirm bonded edge durability after repeated washing, split-vent height against stride, and pocket depth for phone and gel sizes. The reference specification states 85% polyester, 15% spandex, so any shell substitution must be re-tested with the same bonding parameters. Print registration across the block-stripe panels is part of the artwork sign-off. Two to three rounds are typical.
OEM / ODM / Private Label
OEM: build to your tech pack on the confirmed bonded split-short block. ODM: take this split-vent construction and pocket system into your own race-day range. Private label: apply your logo, waistband tab, woven labels, packaging and colourway. MOQ is 100 pcs per style, with print artwork, waistband colour, vent height and branding method fixed before sampling.
Best for
Best for race-day and short-distance running ranges where low weight and free leg movement matter, and for brands building a print-led story. Also suited to gym and hybrid labels that want a lighter alternative to a lined short. The anti-chafe brief keeps the style wearable without a full liner, which suits warmer-weather collections.
Private Label Development Notes
Private label runs keep the confirmed bonded split construction and change brand-facing parts: print artwork, waistband mesh colour, woven label tab, packaging and colourway. Because the print carries most of the visual identity, artwork scale and repeat should be fixed against a physical strike-off before bulk. Vent height and pocket count stay as agreed at sampling.
- 加载中···
- Name
- Phone
- *Title
- *Content