Custom Men's Two-Tone 2-in-1 Run Shorts with Zip Back Pocket and Liner
| Share | |
|---|---|
| Categories | New Arrivals Autumn/Winter 2026 |
| Brand | Hucai Custom Activewear Manufacturer |
| Model | hc2026093026 |
| Product Type | Men's 2-in-1 running shorts with a built-in liner short, mid-thigh |
| Main Fabric | Woven dot-grid mesh outer with a built-in liner short |
| Fabric Composition | 85% polyester, 15% spandex |
| Fit | Relaxed outer fit over a compression liner, mid rise |
| Waistband | Wide flat two-tone elastic waistband with a perforated mesh face |
| Pocket Layout | Eight pockets: 4 gel, 3 phone including 1 zip back pocket, 1 key pocket |
| Liner | Full built-in compression liner short in black |
| Key Structure | Asymmetric drop hem, liner side vent slit, zip back pocket, flatlock seams |
| Branding | Vertical printed wordmark at the outer left hem, back waistband label tab |
| Colourway | Slate multi: white to slate grey gradient with a black liner |
| Fabric / Development Options | Alternative mesh gauges, gradient artwork direction, contrast waistband options |
| Customization | Colourway, gradient artwork, liner colour, pocket layout, branding placement |
| Service | OEM / ODM / Private Label |
Custom Men's Two-Tone 2-in-1 Run Shorts with Zip Back Pocket and Full Liner
These custom men's two-tone 2-in-1 run shorts combine a white-to-slate gradient mesh outer with a full built-in compression liner short in black. The outer carries a fine woven dot-grid texture, an asymmetric drop hem and a vertical wordmark at the left hem; the liner adds a side vent slit at the hem. A zip back pocket sits under the wide two-tone waistband alongside seven further pockets: four gel, three phone and one key. The reference specification states 85% polyester, 15% spandex. Built for marathon training blocks.
- Full built-in black compression liner short with a hem vent slit.
- Zip back pocket under the waistband for a phone or card.
- Eight-pocket storage: four gel, three phone and one key pocket.
- Woven dot-grid mesh outer with an asymmetric drop hem.
- White-to-slate gradient across the front and back panels.
- Wide two-tone waistband with a perforated mesh face.
- Vertical wordmark print at the outer left hem.
Product Specification
| Product Type | Men's 2-in-1 running shorts with a built-in liner short, mid-thigh |
|---|---|
| Main Fabric | Woven dot-grid mesh outer with a built-in liner short |
| Fabric Composition | 85% polyester, 15% spandex (reference specification) |
| Fit | Relaxed outer fit over a compression liner, mid rise |
| Key Structure | Asymmetric drop hem, zip back pocket, liner side vent slit, flatlock seams; eight-pocket layout |
| Feature | Zip back pocket in the waistband with a full black liner short |
| Use Scenario | Marathon training, road running and endurance sessions |
| Development Options | Alternative mesh gauges, gradient artwork direction and contrast waistband options |
| Customization | Colourway, gradient artwork, liner colour, pocket layout and branding placement |
| Logo & Label | Printed or heat-transfer hem print; woven or printed waistband label tab |
| Development Route | OEM, ODM and private label |
| MOQ | 100 pcs |
| Sample Development | Depends on fabric availability, pattern work, branding method, fit adjustment and revision rounds. |
| Bulk Production | Planned after sample approval and confirmation of fabric, trims, measurements, packaging and QC requirements. |
Development & Customization Notes
Product Development
Development starts from the confirmed outer-plus-liner block and the gradient mesh panel. Buyers can move the gradient direction, swap the liner to a contrast or tonal colour, adjust the drop-hem depth and change the pocket count without re-cutting the liner. The zip back pocket is set into the waistband seam, so moving it changes the waistband pattern and should be fixed before sampling.
Sample Development Notes
Sample rounds should confirm the zip back pocket clearance for a phone, the liner leg opening against the outer hem, vent slit position and gradient print hold after washing. The reference specification states 85% polyester, 15% spandex, so any mesh or yarn substitution must be re-tested in the same round. Contrast between the gradient outer and the black liner is part of the colour sign-off. Two to three rounds are typical.
OEM / ODM / Private Label
OEM: build to your tech pack on the confirmed 2-in-1 block and its zip back pocket. ODM: take this gradient mesh short and its eight-pocket storage into your own running range. Private label: add your logo, hem print, waistband tab, woven labels and packaging. MOQ is 100 pcs per style, with colourway, gradient artwork, liner colour and zip position fixed before sampling.
Best for
Best for marathon and half-marathon training ranges where a liner and a secure phone pocket are both expected. Also suited to brands that want a light outer with a dark liner for a two-tone look, and to gym or hybrid labels selling one short across runs and training days. The zip back pocket positions the style for a higher price tier.
Private Label Development Notes
Private label runs keep the confirmed outer-plus-liner construction and change brand-facing parts: hem print, waistband tab, woven labels, packaging, colourway and gradient artwork. The zip puller, tab material and liner colour all form part of the private label specification. Pocket count and zip position stay as agreed at sampling because they change waistband seams and the pattern cut.
- 加载中···
- Name
- Phone
- *Title
- *Content