Custom Men's Compression Half Tights with Built-In Liner and Five Pockets
| Share | |
|---|---|
| Categories | New Arrivals Autumn/Winter 2026 |
| Brand | Hucai Custom Activewear Manufacturer |
| Model | hc2026093021 |
| Product Type | Men's compression half tights, mid-thigh |
| Main Fabric | Double-layer knit with a built-in compression liner |
| Fabric Composition | 85% nylon, 15% spandex |
| Fabric Weight | 250 GSM |
| Fit | Close compression fit, mid rise at the natural waist |
| Waistband | Flat elastic waistband with a front drawcord |
| Pocket Layout | Five pockets: one front-side zip, two rear zip phone pockets, two rear gel pockets |
| Liner | Built-in compression liner |
| Key Structure | Gusseted crotch, mesh back yoke panel, flatlock seams, bound leg hems |
| Branding | Printed leg logo, vertical back waistband label |
| Fabric / Development Options | Alternative knit weights, brushed or matte finishes, contrast panel blocking |
| Customization | Colourway, inseam length, pocket layout, drawcord, branding placement |
| Service | OEM / ODM / Private Label |
Custom Men's Compression Half Tights with Built-In Liner and Five-Pocket Storage
These custom men's compression half tights are a mid-thigh running short built from a double-layer knit with an integrated compression liner. A flat drawcord waistband and a gusseted crotch hold a close fit, while flatlock seams and a mesh back yoke panel keep bulk low across the waist and seat. Five pockets cover race-day carry: one front-side zip, two rear zip phone pockets and two rear gel pockets. The reference specification states 85% nylon, 15% spandex at 250 GSM. Built for road running, marathon training and race-day supply programmes.
- Built-in compression liner with a clean, streamlined silhouette.
- Five-pocket layout: front-side zip, two rear zip phone pockets, two gel pockets.
- Flat drawcord waistband and gusseted crotch for a secure compression fit.
- Double-layer knit construction with a mesh back yoke panel.
- Flatlock seams and bound leg hems reduce bulk under outer layers.
- Mid-thigh half-tight length suited to road running and race day.
- Steel green colourway with a printed leg logo and back waistband branding.
Product Specification
| Product Type | Men's compression half tights, mid-thigh |
|---|---|
| Main Fabric | Double-layer knit with a built-in compression liner |
| Fabric Composition | 85% nylon, 15% spandex; 250 GSM (reference specification) |
| Fit | Close compression fit, mid rise at the natural waist |
| Key Structure | Gusseted crotch, mesh back yoke panel, flatlock seams, bound hems; five-pocket layout |
| Feature | Built-in compression liner with a five-pocket race-day carry layout |
| Use Scenario | Road running, marathon, trail and race day |
| Development Options | Alternative knit weights, brushed or matte finishes and contrast panel blocking |
| Customization | Colourway, inseam length, pocket layout, drawcord and branding placement |
| Logo & Label | Printed or heat-transfer leg logo; woven or printed back waistband label |
| Development Route | OEM, ODM and private label |
| MOQ | 100 pcs |
| Sample Development | Depends on fabric availability, pattern work, branding method, fit adjustment and revision rounds. |
| Bulk Production | Planned after sample approval and confirmation of fabric, trims, measurements, packaging and QC requirements. |
Development & Customization Notes
Product Development
Development starts from the confirmed five-pocket layout, the built-in compression liner and the double-layer knit structure. Buyers can adjust inseam length, raise or lower the waistband, open or close the rear gel pockets and move the leg print without rebuilding the block. Because the liner and the outer layer are cut as one unit, fit sign-off should always cover both layers together rather than the shell alone.
Sample Development Notes
Sample rounds focus on four points: liner tension so the inner short does not ride up, pocket depth for phone and gel carry, waistband recovery behaviour, and print placement on the lower leg. The reference specification states 85% nylon, 15% spandex at 250 GSM; substitute yarns change hand feel and must be re-tested in the same round. Expect two to three rounds before bulk approval.
OEM / ODM / Private Label
OEM: build to your tech pack on the confirmed five-pocket half-tight block. ODM: adapt this mid-thigh silhouette, liner and pocket layout into your own range. Private label: apply your logo, woven labels, hangtags and packaging to the same construction. MOQ is 100 pcs and the colourway, branding method and pocket configuration can all be fixed before sampling starts.
Best for
Suited to running and endurance brands adding a lined half tight to an autumn/winter range, and to gym or functional-training labels that need a pocket-heavy short with compression support. It also fits marathon and race-day collections where storage and a close fit matter more than a loose silhouette. Works as a standalone style or as a base piece under a looser short.
Private Label Development Notes
Private label runs keep the confirmed construction and change only the brand-facing elements: leg logo, back waistband label, drawcord tape, packaging and colourway. Colour matching between the liner and the outer layer needs a single dye lot. Fabric weight, yarn content and elastic specification stay as agreed at sampling so that pocket geometry and liner tension do not shift between repeat orders.
- 加载中···
- Name
- Phone
- *Title
- *Content