Custom Men's Relaxed Stripe Panel Crew Neck Sweatshirt for Activewear Brands
| Share | |
|---|---|
| Categories | New Arrivals Autumn/Winter 2026 |
| Brand | Hucai Custom Activewear Manufacturer |
| Product Specifications | HCA2026091603 |
| Product Type | Men's crew neck sweatshirt / striped pullover sweat top |
| Main Fabric | Cotton-polyester sweat knit |
| Fabric Composition | 50% Cotton / 50% Polyester |
| Fabric Weight | To Be Confirmed Based on Project Requirements |
| Fit | Relaxed fit with dropped shoulder |
| Structure | Contrast stripe panel across chest and sleeves; ribbed crew neck, cuffs and ribbed hem |
| Logo Method | Repeat embroidered wordmark inside the chest band; printed repeat band available |
| Color | Navy; light brown / taupe; sage green |
| Use Scenario | Commute, travel, casual, everyday |
| Customization | Custom colours, stripe proportions and placement, custom fit, custom branding |
| Service | OEM / ODM / Private label |
| Label & Tag | Woven labels, size labels, care labels and hangtags produced to the buyer artwork |
Custom Men's Relaxed Stripe Panel Crew Neck Sweatshirt
A men’s crew neck sweatshirt built around a horizontal contrast stripe panel. The panel crosses the chest and carries straight onto both sleeves, so the stripe reads as one continuous band rather than a printed chest graphic. Inside the band, a repeat embroidered wordmark runs across the front, which turns the stripe itself into the branding zone.
The reference build uses a 50% cotton / 50% polyester sweat knit with a soft hand feel and a clean, structured surface, shown in navy, light brown / taupe and sage green. The body is relaxed with dropped shoulders, and ribbed cuffs and a ribbed hem close the silhouette.
The stripe is the technical centre of this style. Because the band continues from the body onto the sleeve, the pattern has to keep the stripe height matched at the armhole seam on both sides and hold the alignment through grading — which is where most of the sample work sits.
Product Specification
| Product Type | Men's crew neck sweatshirt / striped pullover sweat top |
|---|---|
| Main Fabric | Cotton-polyester sweat knit (reference composition 50% cotton / 50% polyester) |
| Fabric Composition | 50% Cotton / 50% Polyester |
| Fabric Weight | To Be Confirmed Based on Project Requirements |
| Fit | Relaxed fit with dropped shoulder |
| Key Structure | Contrast stripe panel across the chest, continuing onto both sleeves, with a repeat wordmark inside the band; Front and sleeve stripe panel; ribbed crew neck, ribbed cuffs and ribbed hem |
| Feature | Repeat embroidered wordmark inside the chest band; stripe alignment matched across armhole and side seam |
| Use Scenario | Commute, travel, casual, everyday |
| Development Options | Fabric blend, GSM, fit and branding options to be confirmed according to project requirements. |
| Customization | Custom stripe proportions and placement, custom colours, custom fit and pattern development, custom branding |
| Logo & Label | Repeat embroidered or printed wordmark; embroidery or silk screen printing; woven labels, size labels, care labels and hangtags |
| Development Route | OEM from buyer specification or ODM/private label development from reference direction |
| MOQ | 100 pcs |
| Sample Development | Sample timing depends on fabric availability, pattern work, logo method and revision rounds. |
| Bulk Production | Bulk production depends on approved sample, fabric readiness, quantity and production scheduling. |
Development & Customization Notes
Service Introduction
HUCAI activewear supports men's activewear brands with custom product development, OEM and ODM support, and private label customization. This style can be developed from your own tech pack or adapted from the confirmed construction below, with fabric, weight, fit, branding and trims set to your programme.
Customization Information
- Fabric: Alternative cotton-rich blends, French terry or brushed fleece, with GSM and hand-feel targets set per project.
- Color: Custom colourways and lab dips planned per collection; the reference colourways shown are a starting point.
- Logo: Embroidery, heat transfer, silicone or printed branding, positioned to your artwork and quoted per method.
- Label: Woven labels, size labels, care labels and hangtags produced to the buyer artwork.
- Packaging: Polybag, hangtag and carton specification confirmed to the buyer requirement.
- Trims: Rib height, rib elastic content, hem width and stitch type confirmed against the approved sample.
OEM / ODM Support
- Tech pack development: Sampling and bulk run against the buyer tech pack, measurement chart and construction notes.
- Reference image development: Reverse-engineering from reference images into a costed, measurable tech pack.
- Sample revision: Revision rounds on fit, material and branding until the sample is approved.
- Bulk production follow-up: Fabric and trim booking, in-line checks, final inspection and packing follow-up.
- 加载中···
- Name
- Phone
- *Title
- *Content